Loading ...
Loading ...
Loading ...
39
High Beam Headlights
To activate the fixed high beam headlights,
push the multifunction lever, located on the
left side of the steering wheel, towards the
instrument panel. The headlight switch must
be turned to the (auto) or (on) position.
With high beam headlights on, the High
Beam Indicator on the instrument panel will
illuminate.
Multifunction Lever
The high beam headlights are turned off by
pulling the lever to its original position. The
warning light/icon will turn off in the instru-
ment panel when the headlights are turned off.
Flashing The Headlights
Pulling the multifunction lever toward the
steering wheel will activate the high beam
headlights manually. The lights will remain on
as long as the lever is held. Once the lever is
released, the lights will resume the previous
position.
Automatic High Beam Headlights — If
Equipped
The Automatic High Beam Headlights system
provides increased forward lighting at night by
automating high beam control through the use
of a digital camera mounted on the wind-
shield. This camera detects vehicle specific
light and automatically switches from high
beams to low beams until the approaching
vehicle is out of view.
This function is enabled with the radio system,
and can only be activated with the light switch
turned to (auto).
If the high beam headlights are on, the blue
icon/warning light will illuminate in the
instrument panel.
When the speed is higher than 25 mph
(40 km/h) and the function is active, the lights
will turn off if the multifunction lever is pushed
again.
When the speed is lower than 15 mph
(25 km/h) and the function is active, the func-
tion switches the high beam headlights off.
If the high beam headlights are operated
quickly again (pushing the multifunction lever
towards the instrument panel), the warning
light/icon will illuminate in the instrument
panel, and the high beam headlights will turn
on constantly until the speed exceeds 25 mph
(40 km/h).
When the speed of 25 mph (40 km/h) is
exceeded again, the automatic functioning is
reactivated.
If the multifunction lever is pushed again with
the Automatic High Beam Headlights acti-
vated, the Automatic High Beam Headlights
function deactivates.
To deactivate the automatic headlight func-
tion, rotate the headlight switch to the
position.
NOTE:
If the system recognizes heavy traffic areas,
the automatic functions remain disabled
independently of the vehicle’s speed.
The Automatic High Beam functionality may
also be influenced by:
• Reflections on road signs
• Dim headlights from oncoming traffic
• Poor weather conditions
• Presence of dirt or other obstructions on
the sensor
• Damage to the windshield
Turn Signals
To activate the turn signals function, move the
multifunction lever, located on the left side of
the steering wheel, up or down until it reaches
the detent. Moving the lever upward flashes
the right turn signal and moving the lever
downward will flash the left turn signal.
The or turn signal will blink on the instru-
ment panel.
20_GA_OM_EN_USC_t.book Page 39
Loading ...
Loading ...
Loading ...