Loading ...
Loading ...
Loading ...
STARTING AND OPERATING
202
After activating the main reconfigurable area,
the Lane Keeping Assist system messages will
be shown in the instrument cluster display.
When the system is active and the lane limits
have not been detected, the display shows two
grey lane lines.
Lane Limits Not Detected
Exiting A Lane With Detection Of A Single Limit
When the system is active and only, for
example, the left lane limit has been detected,
the detected lane lights up in white on the
display; the system is ready to provide visual
warnings on the display in the event of unin-
tentional exiting of the lane (turn signal indi-
cator not activated) to the left.
Left Lane Limit Detected
When the system detects that the vehicle has
approached the lane line and is about to pass
it, the left line on the display lights up in yellow.
Left Lane Limit Approached
NOTE:
The system operates in the same way, but
mirrored, in the event of exiting the right lane
when only the right lane limit has been
detected.
Exiting A Lane With Detection Of Both Limits
When the system is active, both lane lines on
the display illuminate in white to indicate the
successful detection of both limits.
When lane limits are detected, the system is
ready to provide indications in case the driver
unintentionally leaves the lane (turn signal not
activated).
As the Lane Keeping Assist system detects the
lane limits while the vehicle is in motion, it will
adjust the display accordingly (from white to
yellow and yellow to white, and increase their
thickness).
If a line is crossed, the driver is alerted by an
audible signal as well as the visual indication
in the instrument cluster. The signal is emitted
through the speakers on the side of the lane
limit which is being crossed (e.g. if the vehicle
is exceeding the left line of the lane, the
audible signal will come from the speakers on
the left of the vehicle).
20_GA_OM_EN_USC_t.book Page 202
Loading ...
Loading ...
Loading ...