Loading ...
Loading ...
Loading ...
173
NOTE:
Before resuming the previously set speed, you
must accelerate to a speed close to that speed.
Resume Button Location
In AutoStick (sequential) mode, before resuming
the previously set speed, you should accelerate
until you are close to that speed. Then, push and
release the RES button.
Deactivating
Lightly pressing the brake pedal deactivates
the Speed Control without deleting the set
speed.
The Speed Control may also be deactivated by
applying the electric park brake or when the
braking system is operated (e.g. operation of
the Electronic Stability Control (ESC) system).
The set speed is deleted in the following
cases:
Pushing the on/off button a second time.
The ignition is placed in the OFF position.
If there is a malfunction with the Speed
Control.
ADAPTIVE CRUISE CONTROL
(ACC) — IF EQUIPPED
System Description
The Adaptive Cruise Control (ACC) is a driver
assist system that combines the speed control
functions with controlling the distance from
the vehicle ahead.
The system sets and holds the vehicle at the
desired speed without needing to press the
accelerator. It also sets and holds a distance
from the vehicle ahead (these settings are set
by the driver).
The Adaptive Cruise Control (ACC) uses a radar
sensor located behind the front bumper and a
camera located in the center/upper part of the
windshield, to detect the presence of a vehicle
close ahead.
Front Bumper Radar Location
Windshield Camera Location
This system enhances driving comfort while on
the highway or out of town with light traffic.
If the sensor does not detect a vehicle ahead,
the system will maintain a fixed set speed.
20_GA_OM_EN_USC_t.book Page 173
Loading ...
Loading ...
Loading ...