Loading ...
Loading ...
Loading ...
179
Precautions While Driving
The system may not work correctly in some
driving conditions (see below). The driver must
control the vehicle at all times.
Vehicle Not Aligned
The system may not detect a vehicle traveling
in the same lane, in the same direction, but is
not aligned. It also may not detect a vehicle
which is cutting in from a side lane. Sufficient
distance from the vehicles ahead may not be
guaranteed in these cases.
The non-aligned vehicle can weave in and out
of the driving lane causing the vehicle to brake
or accelerate unexpectedly.
Steering And Curves
Driving on curves with the system set could
limit speed and acceleration to guarantee
vehicle stability, even if no vehicles are
detected ahead.
When leaving the curve, the system resets the
previously set speed.
Steering And Curves
NOTE:
In cases of narrow curves, the performance
of the system could be limited. In this case,
it is advisable to deactivate the system.
The system only limits the speed DURING a
bend and not BEFORE it.
Using The System On Slopes
When driving on roads with a variable incline,
the system may not detect the presence of a
vehicle in the lane. System performance could
be limited according to speed, load, traffic
conditions and steep slopes.
Lane Change
The system may not detect the presence of a
vehicle until it is fully in your lane.
Lane Change
In this case, sufficient distance from the
vehicle which is changing lanes may not be
guaranteed. It is advisable to pay the utmost
attention at all times and be always ready to
apply the brakes if needed.
20_GA_OM_EN_USC_t.book Page 179
Loading ...
Loading ...
Loading ...