Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
218
Replacing Exterior Bulbs
NOTE:
Only replace the bulb when the engine is off.
Also ensure that the engine is cold, to prevent
the risk of burns.
Direction Indicators
To change the bulb of these lights, proceed as
follows:
1. Operating inside the engine compartment,
remove the protective cover.
Protective Cover Location
2. Remove protective cover.
Protective Cover
3. Turn the bulb/connector assembly coun-
terclockwise, and then slide it off the head-
light body.
Bulb/Connector
4. Remove the bulb by sliding it off the bulb
holder.
5. Install the new bulb, making sure it is
correctly inserted in the bulb holder.
6. Insert the bulb/connector assembly in the
housing on the headlight body and turn it
clockwise, making sure that it is locked
correctly.
7. Install the protective cover.
Front Light Cluster with Main Beam Xenon Gas
Discharge Headlights
To replace the bulbs of the main beam head-
lights, contact an authorized dealer.
CAUTION!
Do not touch the new bulb with your fingers.
Oil contamination will severely shorten bulb
life. If the bulb comes in contact with any
oily surface, clean the bulb with rubbing
alcohol.
20_GA_OM_EN_USC_t.book Page 218
Loading ...
Loading ...
Loading ...