Loading ...
Loading ...
Loading ...
60
SETTINGS
START EARLY: This is where you can specify that the recording is to start before
the set start time.
END LATE: This is where you can specify that the recording is to end after the set
end time.
MAX TIMESHIFT: This is where you can set the max. timeshift. The timeshift func-
tion enables you to pause playback during the recording with or fast forward
or rewind using and . The recording runs unimpaired in the background.
The maximum timeshift can be set here.
AUTO DISCARD: The automatic deletion of recordings can be set using this op-
tion. The following options are available here:
−
DISCARD: Keine / Älteste / Längste / Kürzeste
−
UNPLAY: Eingeschlossen / Nicht eingeschlossen. An exception is only pos-
sible if oldest, longest or shortest is selected under DISCARD.
HARD DISK INFORMATION: To display information regarding the USB hard drive,
check this option and press the
OK button. Hard drive information includes, for
example, the volume of remaining available storage space.
FORMAT DISK: Select the FORMAT DISK menu. You must now enter the device PIN
here. The factory default PIN is 0000. The notice THIS WILL REMOVE ALL RECORD
INGS appears. Select YES if you want to start the formatting or NO to cancel the
process. Confirm with OK.
Recording via media buttons
You can operate the recording and playback using the media buttons.
Press this button to start recording the current programme.
From the recording list, you can start playback of the selected recording using this but-
ton.
Pause and restart playback with this button.
Stop the recording and playback with this button.
During playback, activate fast rewind at various speeds with this button: x2, x4, x8,
x16, x32
Press the button to return to normal playback.
During playback, activate fast forward at various speeds with this button: x2, x4, x8,
x16, x32
Press the button to return to normal playback.
Timeshift Recording
You can start a timeshift recording in TV mode to view the current channel after a delay. To do so,
proceed as follows:
Press this button during the current programme. The programme stops there and
the timeshift recording runs in the background. Press this button again to start the
timeshift playback. The channel now runs again with the delay.
If you have previously started the timeshift recording using the button, you can also
start the timeshift playback with this button.
Stop the timeshift playback with this button. The channel is then played back normally
and not with a time delay.
Loading ...
Loading ...
Loading ...