Loading ...
Loading ...
Loading ...
10
3.5. Safety when connecting
3.5.1. Power supply
− Even when deactivated, some of the device components are live. To disconnect the
power to your Smart TV or to completely isolate the device from voltage sources, dis-
connect the device from the power supply completely. To do so, remove mains plug
from the socket.
DANGER!
Risk of electric shock!
Risk of death due to electric shock when the housing is open.
Do not open the device housing. It does not contain any parts for maintenance
by the user.
− Only operate the Smart TV from an earthed 220 to 240 V~ 50 Hz socket. Contact your
local energy supplier if you have any questions about the power supply at the installa-
tion location.
− The socket must always be easily accessible so that the plug can be quickly removed
from the socket in an emergency.
− To disconnect the power supply from your TV, pull the plug from the socket.
− For additional safety, we recommend using a surge protection device to protect your
Smart TV against damage due to voltage spikes or lightening strike from the power
supply.
− Position the cables so that no one can tread on them or trip over them.
− Do not place any objects on the cables as they may be damaged.
− Never touch the plug with wet hands.
− Always hold the housing and never pull on the cable when removing the plug from
the socket.
− Please note that the TV set continues to use power when in standby mode.
If the device switches off and restarts due to electrical discharge while in USB mode
(media player), optional HbbTV mode or optional LAN/WLAN mode (media player/
portal), it may not be able to independently restore the last operating mode. Please
start the respective media or applications again.
The last user settings entered may not be restored following an electrical discharge
that causes the TV to switch off because these settings are only saved 5 minutes af-
ter switching channels.
All multimedia devices that can be connected to the corresponding connections of
the TV must comply with the requirements of the Low Voltage Directive.
Loading ...
Loading ...
Loading ...