Loading ...
Loading ...
Loading ...
EN
23
6.7.4. Satellite
If you have previously activated the reception type SATELLITE, you can now make settings for the
antenna type.
To set the antenna type, select one of the following antenna types:
−
DIRECT: Select this antenna type if you have a single receiver and a satellite antenna. Press
the OK button and then choose the desired satellite (you can also call up the transponder list
using the blue button). Afterwards, press the
OK button again to start the search. After that,
decide whether or not the channel list should be loaded.
−
UNICABLE: Select this antenna type if you have multiple receivers and a single-cable system.
Press the OK button and make all the necessary settings regarding SATELLITE POSITION 1/2,
USER BAND and BAND FREQUENCY (here you can also call up the transponder list using the blue
button). Afterwards, press the OK button again to start the search. After that, decide whether
or not the channel list should be loaded.
−
DISEQC SWITCH: Select this antenna type if you have multiple satellite antennas and a DiSEqC
switch. Press the OK button and activate the desired DISEQC switch 1 4 (here you can also call
up the corresponding transponder list using the blue button). Afterwards, press the
OK but-
ton again to start the search. After that, decide whether or not the channel list should be loa-
ded.
During the search, the scan progress is displayed. In addition, the number of found TV and radio
stations is displayed.
Afterwards, press
OK to continue.
Amazon Alexa (optional): The device can be controlled via Amazon Alexa. Please read the de-
scription in the complete operating instructions (available on the Internet).
At the end of automatic program storage, a TV programme is shown.
The initial installation described here corresponds to the FIRST TIME INSTALLATION op-
tion in the INSTALLATION menu.
Loading ...
Loading ...
Loading ...