Loading ...
Loading ...
Loading ...
Mavic Air 2
User Manual
©
2020 DJI All Rights Reserved.
43
Flight Limits DJI Fly App Aircraft Status Indicator
Max Altitude
Aircraft's altitude cannot
exceed the specied value
Warning: Height limit reached
Blinks green and red
alternately
Max Radius
Flight distance must be within
the max radius
Warning: Distance limit reached
Only Downward Vision System is available
Flight Limits DJI Fly App Aircraft Status Indicators
Max Altitude
Height is restricted to 16 ft (5 m) when the
GPS signal is weak and Downward Vision
System is activated. Height is restricted to
98 ft (30 m) when the GPS signal is weak
and Downward Vision System is inactive.
Warning: Height
limit reached.
Blinks green and red
alternately
Max Radius Blinks yellow
The altitude limit when the GPS is weak will not be restricted if there was a strong GPS signal
when the aircraft was powered on.
If the aircraft is in a GEO zone and there is a weak or no GPS signal, the aircraft status indicator
will glow red for five seconds every twelve seconds.
If the aircraft reaches a limit, you can still control the aircraft, but you cannot fly it any further. If
the aircraft flies out of the max radius, it will automatically fly back within range when the GPS
signal is strong.
For safety reasons, do not fly close to airports, highways, railway stations, railway lines, city
centers, or other sensitive areas. Fly the aircraft only within your line of sight.
GEO Zones
All GEO zones are listed on the DJI ocial website at http://www.dji.com/ysafe. GEO zones are divided into
dierent categories and include locations such as airports, ying elds where manned aircraft operate at low
altitudes, borders between countries, and sensitive locations such as power plants.
There will be prompts in the DJI Fly app to y in GEO zones.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully charged.
2. Make sure the Intelligent Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft arms are unfolded.
4. Make sure the gimbal and camera are functioning normally.
5. Make sure that there is nothing obstructing the motors and that they are functioning normally.
6. Make sure that DJI Fly is successfully connected to the aircraft.
7. Make sure that the camera lens and Vision System sensors are clean.
8. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI certified
manufacturers may cause system malfunctions and compromise safety.
When GPS is available
Loading ...
Loading ...
Loading ...