Loading ...
Loading ...
Loading ...
Mavic Air
2
User Manual
12
©
2020 DJI All Rights Reserved.
Return to Home
The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point when the GPS is
signal is strong. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section
describes these three types of RTH in detail. If the video link signal is lost during flight while the remote
controller is still able to control the movements of the aircraft, there will be a prompt to initiate RTH. RTH can be
cancelled.
GPS
Description
Home Point
The default Home point is the first location where the aircraft received strong
GPS signals (the white GPS icon has at least four bars). The aircraft status
indicator blinks green quickly after the home point has been recorded.
The front LEDs show the orientation of the aircraft and glow solid red when the aircraft is turned on to indicate
the front of the aircraft.
The aircraft status indicators communicate the status of the aircraft’s ight control system. Refer to the table
below for more information about the aircraft status indicators.
Aircraft Status Indicator States
Color Action Aircraft Status
Normal States
Alternating red,
green, and yellow
Blinks Turning on and performing self-diagnostic tests
Yellow Blinks four times Warming up
Green Blinks slowly With GPS
Green Periodically blinks twice With Forward and Downward Vision Systems
Yellow Blinks slowly
No GPS, Forward Vision System or Downward
Vision System
Green Blinks quickly Braking
Warning States
Yellow Blinks quickly Remote controller signal lost
Red Blinks slowly Low battery
Red Blinks quickly Critically low battery
Red Blinks IMU error
Red Solid Critical error
Alternating red and
yellow
Blinks quickly Compass calibration required
Loading ...
Loading ...
Loading ...