Loading ...
Loading ...
Loading ...
Mavic Air 2
User Manual
©
2020 DJI All Rights Reserved.
15
It is important to set a suitable RTH altitude before each flight. Launch DJI Fly, and set the RTH
altitude. The minimum RTH altitude is 2 m.
The aircraft cannot avoid obstacles during Failsafe RTH if the Forward and Backward Vision
Systems are unavailable.
During RTH, the speed and altitude of the aircraft can be controlled using the remote controller
or DJI Fly if the remote controller signal is normal. The orientation of the aircraft and the direction
of flight, however, cannot be controlled. The aircraft cannot avoid obstacles if users push the
pitch stick to accelerate and exceed a flight speed of 12 m/s.
If the aircraft flies into a GEO zone during RTH it will either descend until it exits the GEO zone
and continue to the Home Point or it will hover in place.
The aircraft may not be able to return to a Home Point when the wind speed is too high. Fly with
caution.
Vision Systems are disabled during landing. Make sure to land the aircraft with caution.
Landing Protection
Landing Protection will activate during Smart RTH.
1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground.
2. If the ground is determined unsuitable for landing, Mavic Air 2 will hover and wait for pilot conrmation.
3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the aircraft descends
below 0.5 m. Pull down on the throttle stick or use the auto landing slider to land.
Landing Protection activates during Low Battery RTH and Failsafe RTH. The aircraft performs as follows: During
Low Battery RTH and Failsafe RTH, the aircraft hovers at 2 m above the ground and waits for the pilot to
conrm it is suitable to land. Pull down on the throttle for one second or use the auto landing slider in the app to
land. Landing Protection activates and the aircraft performs the steps listed above.
Precision Landing
The aircraft automatically scans and attempts to match the terrain features below during RTH. When the
current terrain matches the Home Point terrain, the aircraft will land. A prompt will appear in DJI Fly if the terrain
match fails.
Landing Protection is activated during Precision Landing.
The Precision Landing performance is subject to the following conditions:
a. The Home Point must be recorded upon takeo and must not be changed during ight. Otherwise, the
aircraft will have no record of the Home Point terrain features.
b. During takeo, the aircraft must ascend vertically 7 m before moving horizontally.
c. The Home Point terrain features must remain largely unchanged.
d. The Home Point terrain features must be suciently distinctive.
e. The lighting conditions must not be too light or too dark.
The following actions are available during Precision Landing:
a. Press the throttle stick down to accelerate landing.
b. Move the control sticks in any direction to stop Precision Landing. The aircraft will descend vertically after
the control sticks are released.
Loading ...
Loading ...
Loading ...