Loading ...
Loading ...
Loading ...
Mavic Air
2
User Manual
38
©
2020 DJI All Rights Reserved.
Camera View
1. Flight Mode
N
: Displays the current ight mode.
2. System Status Bar
In Flight
: Indicates aircraft ight status and displays various warning messages.
3. Forward and Backward Vision Systems Status
: The top of the icon indicates the status of the Forward Vision System and the bottom of the icon
indicates the status of the Backward Vision System. The icon is white when the vision system is working
normally and red when the vision system is unavailable.
4. GPS Status
: Displays the current GPS signal strength.
5. Video Downlink Signal Strength
: Displays the video downlink strength between the aircraft and remote controller.
6. Battery Level
80
: Displays the current battery level.
7. Battery Information
25'13
: Tap to view battery information such as battery temperature, voltage, and ight time.
8. System Settings
: Tap to view information about safety, control, and transmission.
Safety
Flight Protection: Tap to set the max altitude, max distance, Auto RTH altitude, and to update the Home
Point.
Flight Assistance: The Forward and Downward Vision System are enabled, which means the aircraft can
sense and avoid obstacles when Obstacle Detection is enabled. The aircraft cannot avoid obstacles when
Obstacle Detection is disabled. APAS is only enabled when it is switched on.
Sensors: Tap to view the IMU and compass status and start to calibrate if necessary. Users can also check
the auxiliary LED and unlock GEO zone settings.
Advanced Safety Settings include the behavior settings of the aircraft when the remote controller signal
is lost and when the propellers can be stopped during ight. “Emergency Only” indicates that the motors
AV
AV
0
0
EVEV
12m
12m
1.6m/s1.6m/s
DD
6m6m
1m/s1m/s
HH
25 13
25
13
80
80
1010
N
In Flight
1 2 43 5 6 7 8
131415
16
17
9
10
11
12
Loading ...
Loading ...
Loading ...