Loading ...
Loading ...
Loading ...
Using the Optional Bobbin Winder 277
7
——
——————————————————————————————————————————————————
—
————————————————————————————————
Using the Optional Bobbin Winder
When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for
using the optional bobbin winder are described below.
Precautions
For precautions concerning the power supply, refer to page 34.
CAUTION
Optional bobbin winder and its accessories
Check that the following bobbin winder and accessories are included.
* Visit your authorized Brother dealer.
Memo
● The part code of the bobbin winder set may differ depending on the country/area where the
machine was purchased.
● Depending on the model you purchased, the bobbin winder may be included with the machine.
● Be sure to place the bobbin winder on a level, stable surface.
● Only use the bobbins supplied with this bobbin winder.
1. 2. 3. 4.
5.
1 Main power switch
2 Bobbin winder shaft
3 Hole for thread guide
4 Hole for spool pin
5 DC input connector
6. 7. 8. 9.
10.
No. Name Part Code No. Name Part Code
1 Bobbin winder PRBW1 6 Power supply cord* –
2 Spool pin XC5949-051 7 Metal bobbin × 5 100376-053
3 Spool cushion XA0679-050 8 Spool cap 130012-054
4 Thread guide XC6644-151 9 Weight (L) XC5974-151
5 AC adapter XE1610-101 10 Weight (S) XC6631-051
Loading ...
Loading ...
Loading ...