Loading ...
Loading ...
Loading ...
Aligning the Embroidering Position 105
3
——
—————————————————————————————————————————————————————————————
—
—————————————————————
Using the included
embroidery positioning
sticker
Using the camera built into this machine and the
included embroidery positioning stickers, the
embroidering position can easily be aligned.
1
Affix an embroidery positioning sticker to
the fabric at the desired embroidering
position. Align the center of the large circle
in the embroidery positioning sticker with
the center of the embroidery pattern.
1 Embroidery positioning sticker
2 Center of embroidery pattern
3 Embroidering area
Note
● When hooping the fabric in the
embroidery frame, make sure that the
embroidery pattern will fit within the
embroidering area of the frame being
used.
1 Embroidering area
2 Embroidery pattern size
3 Embroidery positioning sticker
● Depending on the type of fabric to be
used, it may not be possible to easily
remove the embroidery positioning
sticker. Before affixing the embroidery
positioning sticker, check how easily the
sticker can be removed by affixing it to a
scrap of the same type of fabric.
2
In the embroidering settings screen, touch
.
X A screen appears, allowing the area to be
selected where the embroidery positioning
sticker has been affixed.
3
From the areas displayed in the LCD, touch
the area containing the embroidery
positioning sticker to select it.
1 Inner grid is center of embroidery area.
• The displayed embroidery area differs
depending on the attached embroidery
frame.
1
Loading ...
Loading ...
Loading ...