Loading ...
Loading ...
Loading ...
BASIC SETTINGS AND HELP FEATURE —————————————————————————————————————————————————————————
——
230
Specifying the spool stand
LED setting
The spool stand LED lights inform you when the
machine stops, when the thread need to be
changed or error has occurred. Set the spool stand
LED setting to “OFF”, “1” or “2”.
The spool stand LED setting can be specified from
page 4/5 of the settings screen.
1
Touch or to select the desired
setting.
■ Spool stand LED indications
Specifying thread sensor
If thread sensor is set to “OFF”, the machine does
not stop until embroidering is finished, even if the
thread breaks or there is no more thread in the
bobbin. Set thread sensor to “ON”, except when it
is necessary to set it to “OFF”.
When the machine is purchased, “ON” is selected.
The thread sensor can be specified from page 4/5 of
the settings screen.
1
Touch or to select the desired
setting.
Note
● Normally, set thread sensor to “ON”.
When thread sensor is set to “OFF”, the
machine will not be able to detect if the
upper thread has become tangled.
Continuing to use the machine with
tangled thread may cause damage.
OFF
Turns off the spool stand LED.
1 Spool stand LED turns on in the particular
situations; when the machine starts sewing,
thread changed, a sewing error occurs, etc.
2 Spool stand LED is always turned on; indi-
cating the thread color and in the particular
situation.
indicates the spool that
needs changing
(Appropriate thread color
is indicated. For black
thread color, LED light
turns off.)
indicates the spool that
activates thread breakage
error
OFF
sewing error
finished sewing
Loading ...
Loading ...
Loading ...