Loading ...
Loading ...
Loading ...
26 GETTING TO KNOW YOUR VEHICLE
High Beams
With the low beams activated, push the multi-
function lever forward (toward the front of the
vehicle) to turn on the high beams. The lever will
remain forward in a fixed position and the tell-
tale will illuminate in the instrument cluster
display. Pull the multifunction lever rearward
(toward the rear of the vehicle) to turn off the
high beams.
Flash-To-Pass
You can signal another vehicle with your head-
lights by lightly pulling the multifunction lever
toward you. This will cause the high beam head-
lights to turn on, and remain on, until the lever
is released.
Parking Lights
To turn on the parking lights, remove the key or
turn the ignition to the STOP (OFF/LOCK) posi-
tion and turn on the headlights.
NOTE:
If the parking lights are left on and the key is in
the STOP (OFF/LOCK) position with the door
open, an audible chime will sound and a
message will show in the instrument cluster
display. The chime will stop as soon as the door
is closed or the lights are switched off.
Follow Me Home/Headlight Delay
When this feature is selected, the driver can
choose to have the headlights remain on for a
preset period of time after the engine is
turned off.
Activation
Remove the key or turn the ignition to the STOP
(OFF/LOCK) position, and pull the multifunction
lever toward the steering wheel within two
minutes. Each time the lever is pulled, the acti-
vation of the lights will be extended by 30
seconds. The activation of the lights can be
extended to a maximum of 210 seconds.
Deactivation
Pull the multifunction lever toward the steering
wheel and hold it for more than two seconds.
Front Fog Lights — If Equipped
The fog light switch is located on the center
stack of the instrument panel, just below the
radio. Push the switch once to turn the front fog
lights on. Push the switch a second time to turn
the front fog lights off.
Courtesy Lights/Approaching Lights
This feature allows the driver to locate the
vehicle when parked in dark areas. It can be
enabled through the Uconnect system.
Through the Uconnect menu, under the
“Greeting Lights” setting, the driver can choose
between the following activation times: 0, 30,
60, or 90 seconds.
To switch off the feature, select 0 seconds.
When the vehicle is unlocked, the low beams
and parking lights will turn on for the time spec-
ified. Once the door is opened, the lights will
remain on for an additional three minutes, or
until all doors are closed. Once all doors are
closed, the lights will turn off after 10 seconds.
The lights can also be turned off by:
Locking the door
Placing the ignition in the AVV (START) or MAR
(ACC/ON/RUN) position
Refer to “Uconnect Settings” in “Multimedia”
for further information.
20_BG_OM_EN_US_t.book Page 26
Loading ...
Loading ...
Loading ...