Loading ...
Loading ...
Loading ...
134 STARTING AND OPERATING
(Continued)
If it’s necessary to keep the ball mount and
hitch ball assembly mounted for a long period,
it is possible to filter out the ball mount and
hitch ball assembly presence in sensor field of
view. The filtering operation must be performed
only by an authorized dealer.
PARKVIEW REAR BACK UP CAMERA
Your vehicle is equipped with the ParkView Rear
Back Up Camera that allows you to see an
on-screen image of the rear surroundings of
your vehicle whenever the gear selector is put
into REVERSE. The image will be displayed in
the touchscreen display along with a caution
note to “check entire surroundings” across the
top of the screen. After five seconds, this note
will disappear. The ParkView camera is located
on the rear of the vehicle above the rear license
plate.
When the vehicle is shifted out of REVERSE, the
rear camera mode is exited and the last
selected touchscreen appears again.
If your vehicle is equipped with the Camera Delay
feature and it is turned on, the rear camera
image will be displayed for up to 10 seconds
when the vehicle is shifted out of REVERSE
unless the forward vehicle speed exceeds 8 mph
(13 km/h), the transmission is shifted into PARK
or the vehicle's ignition is placed in the STOP
(OFF/LOCK) position.
When enabled, active guide lines are overlaid
on the image to illustrate the width of the
vehicle and its projected backup path based on
the steering wheel position. A dashed center
line overlay indicates the center of the vehicle to
assist with parking.
When enabled, fixed guide lines are overlaid on
the image to illustrate the width of the vehicle.
NOTE:
The ParkView Rear Back Up Camera has
programmable modes of operation that may be
selected through the Uconnect System. Refer to
“Uconnect Settings” in “Multimedia” for further
information.
Before using Rear Park Assist, it is strongly
recommended that the ball mount and hitch
ball assembly is disconnected from the
vehicle when the vehicle is not used for
towing. Failure to do so can result in injury or
damage to vehicles or obstacles because the
hitch ball will be much closer to the obstacle
than the rear fascia when the loudspeaker
sounds the continuous tone. Also, the
sensors could detect the ball mount and
hitch ball assembly, depending on its size
and shape, giving a false indication that an
obstacle is behind the vehicle.
CAUTION!
Rear Park Assist is only a parking aid and it is
unable to recognize every obstacle, including
small obstacles. Parking curbs might be
temporarily detected or not detected at all.
Obstacles located above or below the
sensors will not be detected when they are in
close proximity.
WARNING! (Continued)
The vehicle must be driven slowly when using
Rear Park Assist in order to be able to stop in
time when an obstacle is detected. It is
recommended that the driver looks over his/
her shoulder when using Rear Park Assist.
CAUTION! (Continued)
20_BG_OM_EN_US_t.book Page 134
Loading ...
Loading ...
Loading ...