Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 145
6. Reinstall the plastic cap.
Headlamp Sealing Cap Installation
Front Turn Signal And Daytime Running
Lamps
1. Turn front wheels inboard to access upper
cover in wheel liner.
2. Open the upper cover on the front of the
wheel liner.
3. Remove the cap from the back of the lower
headlamp housing.
4. Rotate the bulb counterclockwise and
remove.
5. Install the bulb into socket, and rotate
bulb/socket clockwise into lamp locking it
in place.
6. Reinstall the plastic cap and close the
cover on the wheel liner.
Front Fog Lamps
To replace the front fog lights, see an autho-
rized dealer.
Front/Rear Side Marker Lamps
The front/rear side marker lamps are LED and
not serviced separately. See an authorized
dealer for replacement of these lights.
Rear Tail, Stop, Backup And Turn Signal
Lamps
1. Open the liftgate.
2. Remove the tail lamp access panel.
3. Remove the two screws that secure the tail
lamp to the body of the vehicle.
4. Remove the tail lamp assembly.
5. Remove the two screws that secure the
backplate to the tail lamp housing.
6. Separate the backplate from the tail lamp
housing.
7. Remove the tail, stop, or turn signal bulbs
by pushing them slightly and turning coun-
terclockwise.
8. Remove the backup lamp bulb by pulling
straight out.
9. Replace lamps as required and reinstall
lamp.
6
20_BG_OM_EN_US_t.book Page 145
Loading ...
Loading ...
Loading ...