Loading ...
Loading ...
Loading ...
100 SAFETY
If a reset procedure step is not completed within 60 seconds, then the turn signal lights will blink and the reset procedure must be performed again in
order to be successful.
8. Place turn signal in neutral state. Right turn light is OFF.
Left turn light BLINKS.
9. Turn left turn signal switch ON. Right turn light is ON SOLID.
Left turn light is ON SOLID.
10. Turn left turn signal switch OFF. (Turn Signal Switch Must be placed in Neutral State). Right turn light is OFF.
Left turn light is OFF.
11. Turn ignition STOP/OFF/LOCK.
12. Turn ignition MAR/ACC/ON/RUN. (Entire sequence needs to be completed within one
minute or sequence will need to be repeated).
System is now reset and the engine may be
started.
Turn hazard flashers OFF (Manually).
Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two seconds
20_BG_OM_EN_US_t.book Page 100
Loading ...
Loading ...
Loading ...