Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 179
The Service Position command can be repeated
several times to bring the blades into the
desired position, up to a maximum of three
times.
After three subsequent activations the strategy
is disabled.
Function Deactivation:
The functionality is reset if:
The ignition is turned to the MAR/RUN position
Number of subsequent activations is three
Two minute timer has expired after turning the
ignition STOP (OFF/LOCK).
NOTE:
When turning the ignition MAR (ACC/ON/RUN),
the blades will go into the parking position.
Front Wiper Blade Removal/Installation
1. Lift the front wiper arm upward to raise the
wiper blade off of the windshield.
2. Push the release button on the arm of the
wiper blade.
3. Push the wiper blade up and remove it.
Front Wiper
4. Install the wiper blade and firmly push the
wiper blade until it snaps into place.
Rear Wiper Blade Removal/Installation
1. Lift the rear wiper arm upward to raise the
wiper blade off of the liftgate glass.
2. Grab the bottom of the wiper blade and
rotate it forward to unsnap the blade pivot
pin from the wiper blade holder.
Rear Wiper
3. Install the wiper blade pivot pin into the
wiper blade holder at the end of the wiper
arm, and firmly push the wiper blade until
it snaps into place.
Exhaust System
The best protection against carbon monoxide
entry into the vehicle body is a properly main-
tained engine exhaust system.
1 — Wiper Blade
2 — Release Button
3 — Wiper Arm
1 — Wiper Blade
2 — Blade Pivot Pin
3 — Wiper Arm
4 — Wiper Blade Holder
7
20_BG_OM_EN_US_t.book Page 179
Loading ...
Loading ...
Loading ...