Loading ...
Loading ...
Loading ...
Maintenance
8054-068
This chapter describes upk
eep of the machine, including how to clean the machine and adjustment of print quality.
Maintenance and Inspections
● The minimum holding period for performance parts for r
epairs and toner cartridges is seven (7) years after
production of the machine model is discontinued.
● If a problem occurs during operation, see "Troubleshooting (FAQ)" on the online manual website. If the
problem still cannot be resolved or you think the machine needs to be checked, contact your dealer or
service representative.
Installation
● If you nd the machine's operation to be noisy in some operating modes or due to your surroundings, we
recommend setting up the machine in a separate location from your oce.
● Water droplets (condensation) may form inside the machine if the room where the machine is installed is
heated rapidly, or if the machine is moved from a cool, dry location to a warm, humid location. Using the
machine under these conditions may result in problems such as paper jams, poor print quality, or faults. Let
the machine adjust to the ambient temperature and humidity for at least two hours before use.
● Machines with storage devices such as hard disks may not operate properly when used at high altitudes
(3,000 meters above sea level or higher).
◼ Basic Cleaning
Regular Cleaning(P. 377)
◼ Replacing Consumables
Replacing the Toner Cartridge(P. 381) Checking the Remaining Amount of Consumables(P. 388)
Maintenance
375
Loading ...
Loading ...
Loading ...