Hikvision DS-K1T690MW Quick Start Guide

Loading ...

You can set the exit buon as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

Aer swiping the normal card and relay acon, the mer for locking the door starts working.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended accesss

needs swipes her/his card.

Door Le Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a congured me period. If it is

set as 0, no alarm will be triggered.

Lock Door when Door Closed

The door can be locked once it is closed even if the Door Locked Time is not reached.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door/oor(s) to copy the parameters in the page to

the selected doors/oor(s).

Note

The door or oor's status duraon sengs will be copied to the selected door/oor(s) as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Before You Start

Add access control device to the client.

DS-K1T690 Series Face Recognion Terminal User Manual

146

Loading ...

Hikvision DS-K1T690MW Ultra Face Recognition Terminals