Hikvision DS-K1T690MW Quick Start Guide

Loading ...

Note

Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the

device, receive alarm nocaon and so on.

Check the checkbox of Enable to enable the funcon.

Oponal: Check the checkbox of Custom, and you can set the server address by yourself.

Create a Stream Encrypon/Encrypon Key for the device.

Note

6 to 12 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use a

combinaon of no less than 8 leers or numbers.

Click Save to enable the sengs.

Set ISUP Parameters

Set the ISUP parameters for accessing device via ISUP protocol.

Steps

Note

The funcon should be supported by the device.

Click Conguraon → Network → Advanced → Plaorm Access .

Select ISUP from the plaorm access mode drop-down list.

Check Enable.

Set the protocol version, alarm receiver type, port, device ID, ISUP key, and the register status.

Note

Only 5.0 version is supported, you should set the ISUP key as well.

Click Save.

Congure HTTP Listening

The device can send alarm informaon to the desnaon IP or host via HTTP protocol/HTTPS

protocol.

Before You Start

The desnaon IP or host name should support the HTTP protocol/HTTPS protocol to receive the

alarm informaon.

Note

The funcon should be supported by the device.

DS-K1T690 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T690MW Ultra Face Recognition Terminals