Hikvision DS-K1T690MW Quick Start Guide

Loading ...

Select an authencaon mode according to your actual needs from the drop-down list.

Mulple People Authencaon

Mulple people can be authencated at the same me.

Recognion Interval

If the interval between card presenng of the same card is less than the congured value, the

card presenng is invalid.

Authencaon Interval

You can set the authencaon interval of the same person when authencang. The same

person can only authencate once in the congured interval. A second authencaon will be

failed.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Max. Authencaon Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Communicaon with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Max. Interval When Entering Password

When you entering the password on the card reader, if the interval between pressing two digits

is longer than the set value, the digits you pressed before will be cleared automacally.

OK LED Polarity/Error LED Polarity

Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader

parameters. Generally, adopts the default sengs.

Enable Tampering Detecon

Enable the an-tamper detecon for the card reader.

Set Privacy Parameters

Set the event storage type, picture upload and storage parameters, and the picture clearing

parameters.

Go to Conguraon → Access Control → Privacy

Event Storage Sengs

Select a method to delete the event. You can select from Delete Old Events Periodically, Delete

Old Events by Specied Time, or Overwring.

Delete Old Events Periodically

DS-K1T690 Series Face Recognion Terminal User Manual

102

Loading ...

Hikvision DS-K1T690MW Ultra Face Recognition Terminals