Hikvision DS-K1T690MW Quick Start Guide

Loading ...

Click Add, and enter the SSID, working mode, and encrypon type. Click Connect. When the

Wi-Fi is connected, click OK.

Oponal: Set the WLAN parameters.

1) Click Network Sengs.

2) Set the IP address, subnet mask, and default gateway. Or check Enable DHCP and the system

will allocate the IP address, subnet mask, and default gateway automacally.

Click OK.

SIP Seng

Steps

Click Network → Basic Sengs → SIP to enter the sengs page.

Check Enable VOIP Gateway.

Congure the SIP parameters.

Click Save to enable the sengs.

Report Strategy Sengs

You can set the center group for uploading the log via the ISUP protocol.

Go to Conguraon → Network → Basic Sengs → Report Strategy .

You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save

the sengs.

Center Group

Select a center group from the drop-down list.

Main Channel

The device will communicate with the center via the main channel.

Note

N1 refers to wired network.

Plaorm Access

Plaorm access provides you an opon to manage the devices via plaorm.

Steps

Click Conguraon → Network → Advanced → Plaorm Access to enter the sengs page.

Select the Plaorm Access Mode.

DS-K1T690 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T690MW Ultra Face Recognition Terminals