Hikvision DS-K1T690MW Quick Start Guide

Loading ...

Enable Temperature Detecon

When enabling the funcon, the device will authencate the permissions and at the same

me take the temperature. When disabling the device, the device will authencate the

permissions only.

Over-Temperature Alarm Threshold (Max./Min.)

Edit the threshold according to actual situaon. If the detected temperature is higher or

lower than the congured parameters, an alarm will be triggered. By default, the value is

37.3°.

Temperature Compensaon

If the measured temperature is higher/lower than the actual object's temperature, you can

set the compensaon temperature here. Available range: -99 °C to 99 °C.

Door Not Open When Temperature is Abnormal

When enabling the funcon, the door will not open when the detected temperature is higher

or lower than the congured temperature threshold. By default, the funcon is enabled.

Temperature Measurement Only

When enabling the funcon, the device will not authencate the permissions, but only take

the temperature. When disabling the funcon, the device will authencate the permissions

and at the same me take the temperature.

Capture White Light Picture

Aer enabling Temperature Measurement Only, you can enable Capture White Light

Picture. Aer enabling this funcon, the device will capture white light picture.

Measure Area Sengs

Congure the temperature measurement area.

Unit

Select a temperature unit according to your preference.

Click Save.

Black Body Sengs

The black body can correct the measuring temperature. You should set the black body parameters

if the black body temperature measurement scene is required. If no black body is required, do not

set the black body parameters, or the temperature may not correct.

Steps

Click Conguraon → Temperature → Black Body Sengs .

DS-K1T690 Series Face Recognion Terminal User Manual

116

Loading ...

Hikvision DS-K1T690MW Ultra Face Recognition Terminals