Loading ...
Loading ...
Loading ...
4.
Set parameters.
Sensivity
It stands for the percentage of the body part of an acceptable target that goes across the
predened region. Sensivity = 100 - S1/ST × 100. S1 stands for the target body part that goes
across the predened region. ST stands for the complete target body. The higher the value of
sensivity is, the more easily the alarm can be triggered.
Figure 10-4 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
7.
Click Save.
10.3.5 Set Unaended Baggage Detecon
It is used to detect the objects le over in the predened region. Linkage methods can be triggered
aer the object is le and stays in the region for a set me period.
Before You Start
●
Go to VCA and select any of the smart applicaons that come with the system.
Steps
1.
Go to VCA → Set Applicaon → Smart Event → Unaended Baggage Detecon .
2.
Check Enable.
3.
Click Add to add a rule and set a detecon area.
Network Camera User Manual
83
Loading ...
Loading ...
Loading ...