Hikvision DS-2CD63C5G1-S/RC User Manual

Loading ...

Figure 10-3 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

10.3.4 Set Region Exing Detecon

It is used to detect objects exing from a predened virtual region. If it occurs, the device can take

linkage acons.

Before You Start

●

Go to VCA and select any of the smart applicaons that come with the system.

Steps

Go to VCA → Set Applicaon → Smart Event → Region Exing Detecon .

Check Enable.

Click Add to add a rule and set a detecon area.

1) Draw a detecon area. Click

, click on the live view to specify the vertexes and draw the

boundaries of the detecon area, and right click to complete drawing.

2) Set the minimum size and the maximum size for the target to improve detecon accuracy.

Only targets whose size are between the maximum size and the minimum size trigger the

detecon. Click and , then drag the mouse in the live view to draw the minimum and

maximum target size.

3) Oponal: Click to delete all the seng areas.

Network Camera User Manual

Loading ...

Hikvision DS-2CD63C5G1-S/RC 12 MP DeepinView Fisheye Network Camera