Hikvision DS-2CD63C5G1-S/RC 12 MP DeepinView Fisheye Network Camera

User Manual - Page 111

For DS-2CD63C5G1-S/RC.

PDF File Manual, 115 pages, Read Online | Download pdf file

DS-2CD63C5G1-S/RC photo
Loading ...
Loading ...
Loading ...
3.
Click Add to add a detecon area.
4.
Click to draw the polygon detecon area (count area). Le-click end-points in the live view
window, and right-click to nish the drawing.
5.
Draw a detecon line. The arrow shows entering direcon, you can click to change the
direcon.
-
When the detecon area only supports one-way direcon, it is recommended to click
to
draw a straight detecon line.
-
When the detecon area supports mulple direcons, or there are walls and obstacles in the
detecon area, it is recommended to click
to draw a polyline.
Note
In order to improve the counng accuracy, please draw the detecon area according to the
following rules.
The detecon area needs to cover the people entering and exing access.
The detecon line must be completely contained within the red detecon area and
perpendicular to the path of the person passing through.
6.
Oponal: Adjust the detecon area and detecon line.
Click
Clear the selected detecon area or line.
Click
Clear all detecon areas and lines.
7.
Oponal: Repeat the above steps to draw up to 3 detecon areas and corresponding detecon
lines.
8.
Set people counng parameters.
OSD Overlay Content
Select the counng data type to be displayed in the live view image from the drop-down list,
and adjust the display posion of people counng data in the live view image.
Note
OSD overlay only counts the number of the person on the current day. The data will be
cleared automacally when the device restarts or at the daily reset me.
Daily Reset Time
The device clears the data in 00:00 each day by default. You can select a me point through
the drop-down list. Aer selecng, the counng data will be automacally cleared at this
me point every day.
You can click Manual Reset to manually trigger a data reset and clear the current people
counng data.
9.
Click Save.
10.
Set arming schedule. See Set Arming Schedule .
11.
Set linkage method. See Linkage Method Sengs .
12.
Click Save.
13.
Oponal: Set people counng data uploading parameters.
Network Camera User Manual
99
Loading ...
Loading ...
Loading ...