Loading ...
Loading ...
Loading ...
FTP
For FTP sengs, refer to Set FTP .
Email
For Email sengs, refer to Set Email .
Alarm Output
For alarm output sengs, refer to Automac Alarm .
Audible Alarm Output
For audible alarm output sengs, refer to Set Audible Alarm Output .
Alarm Server
For alarm server sengs, refer to Set Alarm Server .
10.2.1 Set Camera Info
Customize specic informaon for the device. It may help idenfy a certain device when mulple
devices are under management.
Go to VCA → Set Applicaon → General Sengs → Camera Info to set Device No. and Camera
Info.
10.3 Smart Event
Note
●
The funcon is only supported in the soware decoding mode, or the display mode of sheye
view in the hardware decoding mode.
●
For certain device models, you need to enable the smart applicaon on VCA page rst. Make
sure you have enough memory, RAM, and FLASH to enable the applicaon, otherwise, you need
to disable other applicaons rst.
10.3.1 Set Intrusion Detecon
It is used to detect objects entering and loitering in a predened virtual region. If it occurs, the
device can take linkage acons.
Before You Start
●
Go to VCA and select any of the smart applicaons that come with the system.
Steps
1.
Go to VCA → Set Applicaon → Smart Event → Intrusion Detecon .
Network Camera User Manual
78
Loading ...
Loading ...
Loading ...