Loading ...
Loading ...
Loading ...
Daily report calculates the data on the date you selected; weekly report calculates the week data
your selected date belongs to; monthly report calculates the data for the month your selected
date belongs to; and the annual report calculates the data for the year your selected date
belongs to.
Example
Aer the calculang, you can view the data in the spaal heat map and me heat map.
Spaal Heat Map
Perform a stascal analysis on the cumulave dwelling of people in dierent areas in the
enre image.
Dierent heat values correspond to dierent colors, among which red (255, 0, 0) represents the
highest heat, and blue (0, 0, 255) represents the lowest heat. The highest heat value and lowest
heat value are divided into N levels, corresponding to dierent colors.
Time Heat Map
Perform a stascal analysis on the total dwelling me of all people in the enre image.
The me heat map is presented in a line chart, and you can click Export to export the data in an
excel le.
10.6 People Counng
People counng is used to calculate the number of people entering or exing an area.
Note
●
The funcon is only supported in the soware decoding mode, or the display mode of sheye
view in the hardware decoding mode.
●
For certain device models, you need to enable the applicaon on the VCA page rst. Make sure
you have enough memory, Smart RAM, and FLASH to enable the applicaon, otherwise, you
need to disable other applicaons rst.
10.6.1 Set People Counng Rule
Aer seng the detecon rules and algorithm parameters, the device calculates the number of
people entering or exing in the rule area, triggers linkage acons and uploads data automacally.
Before You Start
●
Go to VCA and select the applicaon. Select People Counng and click Next to enable the
funcon.
●
For the device supporng HEOP, go to VCA to import and enable People Counng.
Steps
1.
Go to VCA → Set Applicaon → People Counng → Rule .
2.
Check Enable to enable the funcon.
Network Camera User Manual
98
Loading ...
Loading ...
Loading ...