Loading ...
Loading ...
Loading ...
Safety features of your vehicle
124
Seat
3. Route the seat belt webbing to the
outward of the rear seat to prevent
the belts from being trapped behind
or under the seats.
4. Pull on the seatback folding lever,
then fold the seat toward the front of
the vehicle. When you return the seat
-
back to its upright position, always be
sure it has locked into position by
pushing on the top of the seatback.
5. To use the rear seat, lift and unfold
the seatback to the upright position
by pulling up the folding lever. Push
the seatback firmly until it clicks into
place. Make sure the seatback is
locked in place.
6. Return the rear seat belt to the proper
position.
WARNING
Uprighting Seat
When you return the seatback to its
upright position, hold the seatback and
return it slowly. If the seatback is
returned without holding it, the back of
the seat could spring forward, resulting
in injury caused by being struck by the
seatback.
WARNING
Rear Seatback
To ensure maximum protection in the
event of an accident or sudden stop,
when returning the rear seat to the
upright position:
僅 Be careful not to damage the seat belt
webbing or buckle.
僅 Do not allow the seat belt webbing or
buckle to become pinched or caught
in the rear seat.
僅 Ensure the seatback is completely
locked into its upright position by
pushing on the top of the seatback.
Failure to adhere to any of these
instructions could result in serious
injury or death in the event of a crash.
WARNING
Unless the driver's position is properly
set according to the driver's physical fig
-
ure, do not fold the rear seat. It may
increase bodily injuries in a sudden stop
or collision.
OCV031112N
OCV031009L
OCV031113N
Loading ...
Loading ...
Loading ...