Loading ...
Loading ...
Loading ...
27
6
6
Driving your vehicle Brake system
When the conversion from AUTO HOLD
to EPB is not working properly a warning
will sound and a message will appear.
A:
AUTO HOLD turning Off! Press
brake pedal
NOTICE
Engage the brake pedal when the above
message appears for the AUTO HOLD
and EPB may not activate.
If the EPB is applied while AUTO HOLD
is activated because of an ESC (Elec
-
tronic Stability Control) signal, a warning
will sound and a message will appear.
A:
Parking brake automatically
engaged
EPB malfunction indicator
This warning light illuminates if the EV
button is changed to the ON position
and goes off in approximately 3 seconds
if the system is operating normally.
If the EPB malfunction indicator remains
on, comes on while driving, or does not
come on when the EV button is changed
to the ON position, this indicates that the
EPB may have malfunctioned.
If this occurs, have your vehicle checked
by an authorized Kia dealer as soon as
possible.
The EPB malfunction indicator may illu
-
minate when the ESC indicator comes
on to indicate that the ESC is not work
-
ing properly, but it does not indicate a
malfunction of the EPB.
The EPB warning light may illuminate if
the EPB switch operates abnormally.
Shut the vehicle off and turn it on again
after a few minutes.
CAUTION
The warning light will go off and the EPB
switch will operate normally. However, if
the EPB warning light is still on, have the
system checked by an authorized Kia
dealer.
If the parking brake warning light does
not illuminate or blinks even though the
EPB switch was pulled up, the EPB is not
applied.
If the parking brake warning light blinks
when the EPB warning light is on, press
the EPB switch, then pull it up. Once
more press it back to its original position
and pull it back up. If the EPB warning
does not go off, have the system
checked by an authorized Kia dealer.
OCV051270N
OCV051271N
OCV041136L
Loading ...
Loading ...
Loading ...