Loading ...
Loading ...
Loading ...
Electric vehicle guide
101
EV menu
Vehicle To Load (V2L) (if
equipped)
V2L is the system that provides AC
power using the high voltage battery for
driving to operate several electronical
products.
A:
Electric Vehicle
1 EV Charge Transfer
Select
EV
→
Vehicle to Load (V2L)
on
the screen.
You can set the battery discharging limit
for high voltage battery for driving.
A:
EV Charge Transfer Settings
1 Discharging Limit
If the vehicle reaches to the limit, it auto
-
matically cuts supply of electricity.
Energy information
Select
EV
and see the vehicle image
from the infotainment system screen.
You can check battery discharging level.
How to connect
Exterior
1
Open the cover of the V2L connector.
2
Close the cover after connecting com
-
patible appliances and electronic
products to the power outlet.
3
Connect the V2L connector to the
charging hole on the vehicle.
4
Press the switch (1) of the V2L con
-
nector and check whether the light (2)
is on or off. The light (2) may not turn
on normally when:
僅 See the battery discharging limit for
high voltage battery for driving in
Energy Consumption
menu on the
screen. If it is higher than the cur
-
rent amounts of high voltage bat
-
tery, the light (2) does not turn on.
僅 Check whether the light of V2L con
-
nector or interior power outlet turns
on or not.
僅 If the warning message for V2L
appears on the cluster, refer to
"LCD display messages" on page 1-
11.
僅 If V2L does not operate previously
when you connects another com
-
patible appliances, have your vehi
-
cle inspected by an authorized Kia
dealer.
OCV041287L
OCV041288L
OCVQ011001_4
Loading ...
Loading ...
Loading ...