Loading ...
Loading ...
Loading ...
Maintenance
168
Wiper blades
Replacing front windshield wiper
blade
After turning off the vehicle, move the
wiper switch to the single wiping (MIST)
position within 20 seconds and hold the
switch more than 2 seconds until the
wiper blade is in the fully up position.
Type A
1. Raise the wiper arm and turn the
wiper blade assembly to expose the
plastic locking clip.
CAUTION
Wiper Arms
僅 Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.
僅 Do not pull wiper arm forward, since it
could chip the hood paint.
2. Compress the clip and slide the blade
assembly downward.
3. Lift it off the arm.
4. Install the blade assembly in the
reverse order of removal.
Type B
1. Raise the wiper arm.
2. Lift up the wiper blade clip (1). Then
pull down the blade assembly and
remove it (2).
3. Install the new blade assembly.
4. Return the wiper arm on the wind
-
shield.
5. Change EV button to the ON position
and wiper arms will return to the nor
-
mal operating position.
OCV071007
OCV071070N
OCV071071N
OCV071072N
OCV071011L
OCV071012L
Loading ...
Loading ...
Loading ...