Loading ...
Loading ...
Loading ...
Features of your vehicle
105
Keys
Liftgate open (3)
To open:
1. Make sure you have the smart key in
your possession.
2. Pressing the button (3) on the smart
key will only unlock the liftgate.
3. Once the liftgate is opened and then
closed, the liftgate will lock automati
-
cally.
NOTICE
The liftgate unlock will only operate
when the smart key is within 28~40
inches (0.7~1 m) from the liftgate.
Panic alarm (4)
1. Press the panic button (4) for more
than 1 second.
2. The horn sounds and hazard warning
light flash for about 27 seconds.
To stop the horn and lights, press any
button on the smart key.
Remote start (5)
You can start the vehicle using the
remote start button (5) of the smart key.
To start the vehicle remotely:
僅 Lock the doors by pressing the door
lock button (1) within 32 feet (10 m)
distance from the vehicle.
僅 Press the remote start button (5) for
over 2 seconds within 4 seconds after
locking the doors.
Press the remote start button (5) once to
turn off the vehicle. Air conditioner/
heater system maintains the status
before turning off the vehicle. If no fur
-
ther action for operating/driving the
vehicle is taken, the vehicle will be
turned off 10 minutes after starting the
vehicle remotely.
CAUTION
僅 Laws in your country may restrict the
use of remote start. You should check
country regulations before using this
remote starting system.
僅 It is only possible to start the vehicle
remotely when shifted to P (Park).
僅 If the hood or the liftgate is opened,
you cannot start the vehicle remotely.
Remote Smart Parking Assist
(RSPA) (6, 7) (if equipped)
The Remote Smart Parking Assist
(RSPA) helps the drivers park their vehi
-
cle by using sensors to measure parking
spaces and control the steering wheel,
gear shift and vehicle speed to semiau
omatically park the vehicle.
With the smart key, the driver can move
the vehicle forward or backward using
the forward/backward buttons (6, 7) on
the smart key.
For more information, refer to "Remote
Smart Parking Assist (RSPA) (if
equipped)" on page 6-165.
Mechanical key
If the smart key does not operate nor
-
mally, you can lock or unlock the driver's
door by using the mechanical key.
To remove the mechanical key, press
and hold the release button (1) and
remove the mechanical key (2).
To reinstall the mechanical key, put the
key into the hole and push it until a click
sound is heard.
OCV041004L
Loading ...
Loading ...
Loading ...