Loading ...
Loading ...
Loading ...
11
1
1
Electric vehicle guide EV menu
5
Press the switch (1) to turn off the
light (2) the V2L will be off. You can
disconnect the V2L connector when
the light (2) turns off or the charging
door lock is deactivated pressing the
door unlock button on the smart key.
Interior
1. Connect to the power outlet located in
bottom of the rear seat with the EV
button in the ON position.
2. Use the mechanical key to unlock the
power outlet cover.
3. Check the operation status through
the front indicator of the power outlet.
僅Blue: Standby
僅 Red: No power supply even though
the power outlet is connected
僅 Green: Normal power supply
through the normal connection of
the power outlet.
LCD display messages
V2L has ended. Battery level has
reached the set value
A:
V2L has ended. Battery level has
reached the set value
When the high voltage battery level
reaches the discharging limit set level,
the V2L will stop and the warning will be
displayed. If you want to use the V2L
continuously, make the discharging limit
set level lower than the present battery
level.
V2L stopped due to excessive
power use
A:
V2L stopped due to excessive
power use
If you use an electrical appliance that
exceeds the maximum power output the
vehicle can supply, it will stop working
and display a warning message. Make
sure that the total power consumption of
your electrical appliances does not
exceed the V2L maximum power output.
OCVQ011002L
OCVQ011046
OCVQ011047
OCV041100L
OCV041101L
Loading ...
Loading ...
Loading ...