Loading ...
Loading ...
Loading ...
Driving your vehicle
1086
Smart Cruise Control (SCC)
Smart Cruise Control operation
Operating conditions
Smart Cruise Control will operate when
the following conditions are satisfied.
Basic function
僅 The gear is in D (Drive)
僅 The driver's door is closed
僅 EPB (Electronic Parking Brake) is not
applied
僅 Your vehicle speed is within the oper
-
ating speed range
-When there is no vehicle in front:
5~110 mph (10~180 km/h)
- when there is a vehicle in front:
0~110 mph (0~180 km/h)
僅 ESC (Electronic Stability Control) or
ABS is on
僅 ESC (Electronic Stability Control) or
ABS is not controlling the vehicle
僅 Forward Collision-Avoidance Assist
brake control is not operating
僅Remote Smart Parking Assist brake
control is not operating (if equipped)
僅 The vehicle is not in a power down
status (Power down indicator light is
not illuminated)
NOTICE
At a stop, if there is no vehicle in front of
your vehicle, the function will turn on
when the brake pedal is depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will oper
-
ate when the turn signal indicator is
turned on to the left while Smart Cruise
Control is operating, and the following
conditions are satisfied:
僅 Your vehicle speed is above 40 mph
(60 km/h)
僅 The hazard warning flasher is off
僅 A vehicle is detected in front of your
vehicle
僅 Deceleration is not needed to main
-
tain distance with the vehicle in front
WARNING
僅 When the turn signal indicator is
turned on to the left (left-hand drive)
or turned on to the right (right-hand
drive) while there is a vehicle ahead,
the vehicle may accelerate temporar
-
ily. Pay attention to the road condi
-
tions at all times.
僅 Regardless of your country's driving
direction, Overtaking Acceleration
Assist will operate when the condi
-
tions are satisfied. When using the
function in countries with different
driving direction, always check the
road conditions at all times.
Loading ...
Loading ...
Loading ...