Loading ...
Loading ...
Loading ...
Features of your vehicle
945
Lighting
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other lights are
detected.
NOTICE
Depending on the instrument cluster
specifications or theme, images or colors
may be displayed differently.
High Beam Assist Malfunction
and limitations
High Beam Assist Malfunction
A:
Check High Beam Assist (HBA) sys
-
tem
When High Beam Assist is not working
properly, the warning message will
appear and warning light ( ) will illumi
-
nate on the cluster. Have your vehicle
inspected by an authorized Kia dealer.
Limitations of High Beam Assist
僅 Light from a vehicle is not detected
because of lamp damage, or because
it is hidden from sight, etc.
僅 Headlamp of a vehicle is covered with
dust, snow or water.
僅 A vehicle's headlamps are off but the
fog lamps are on and etc.
僅 There is a lamp that has a similar
shape as a vehicle's lamp.
僅 Headlamps have been damaged or
not repaired properly.
僅 Headlamps are not aimed properly.
僅 Driving on a narrow curved road,
rough road, uphill or downhill.
僅 Vehicle in front is partially visible on a
crossroad or curved road.
僅 There is a traffic light, reflecting sign,
flashing sign or mirror ahead.
僅 There is a temporary reflector or flash
ahead (construction area).
僅 The road conditions are bad such as
being wet, iced or covered with snow.
僅 A vehicle suddenly appears from a
curve.
僅 The vehicle is tilted from a flat tire or
is being towed.
僅 Light from a vehicle is not detected
because of exhaust fume, smoke, fog,
snow, etc.
NOTICE
For more details on the limitations of the
front view camera, refer to "Forward Col
-
lision-Avoidance Assist (FCA)" on page
6-46.
WARNING
僅 At times, High Beam Assist may not
work properly. The function is for your
convenience only. It is the responsibil
-
ity of the driver for safe driving prac
-
tices and always check the road
conditions for your safety.
僅 When High Beam Assist does not
operate normally, change the head
-
lamp position manually between high
beam and low beam.
OCV051213L
Loading ...
Loading ...
Loading ...