Loading ...
Loading ...
Loading ...
31
1
1
Electric vehicle guide Charging electric vehicle
How to disconnect DC charger
1. Remove the charging connector when
DC charging is completed, or after
you stop charging using the DC char
-
ger.
Refer to each respective fast charger
manual for details about how to dis
-
connect the charging connector.
CAUTION
When disconnecting the charging con
-
nector, do not try to disconnect it by
force without pressing the release but
-
ton. This may damage the charging con
-
nector and vehicle charging inlet.
2. Make sure to completely close the DC
charging inlet cover.
3. Make sure to completely close the
charging door.
Portable charge (sold separately)
1
Cord & AC plug (Cord set)
2
Control Box
3
Charging Cable and Charging Con
-
nector
This cable is designed to prevent prob
-
lems caused by unexpected battery dis
-
charge and when you use general
outlets, it may lead to excessive electric
-
ity charges as the electricity charges for
electric vehicles will not be applied. So
refrain from using it to fully charge your
car.
If this cable is connected to a household
power source, it may exceed the capac
-
ity of the outlet (amperage), resulting in
safety problems such as electrical shut
-
down and fire.
NOTICE
Household power source should be a
dedicated 120VAC/15AMP/properly
grounded outlet.
How to set the charge level of the
portable charger (sold sepa
-
rately)
1. Check the outlet's current rating
before connecting the plug to the out
-
let.
2. Connect the power plug to the house
-
hold electrical outlet.
3. Check the status of the control box
display
4. Adjust the charging current by press
-
ing the button (1) on the back of the
control box for more than 1 second.
5. Each time the button (1) is pressed,
the control box display is sequentially
changed to 12 A, 10 A and 8 A.
Once the charging current setting is
complete, start charging (refer to
"Portable charge (sold separately)" on
page 1-31 for more information).
OCVQ011020L
OCVQ011107N
OCVQ011021L
Loading ...
Loading ...
Loading ...