Hikvision IDS-96128NXI-I16 User Manual

Loading ...

Select the output to show the event video.

Full Screen Monitoring Dwell Time

Set the me in seconds to show the alarm event screen. If alarms are triggered

simultaneously in several channels, their full-screen images will be switched at an interval of

10 seconds (default dwell me).

3. Go to the Linkage Acon interface of the alarm detecon (e.g., moon detecon, video

tampering, face detecon, etc.).

4. Select the Full Screen Monitoring alarm linkage acon.

5. Select the channel(s) in Trigger Channel for full screen monitoring.

6.4.2 Congure Buzzer

When an alarm is detected, the buzzer will make an audible beep.

Steps

1. Go to System → Live View → General .

2. Check Enable Audio Output.

3. Set the audio volume.

4. Click Apply.

5. Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, video tampering,

face detecon, etc.).

6. Select Buzzer as the alarm linkage acon.

6.4.3 Nofy Surveillance Center

The device can send an excepon or alarm signal to the remote alarm host when an event occurs.

The alarm host refers to the PC installed with client soware (e.g., iVMS-4200, iVMS-5200).

Steps

1. Go to System → Network → Advanced → More Sengs .

2. Set the alarm host IP and alarm host port.

3. Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, video tampering,

face detecon, etc.).

4. Select Nofy Surveillance Center.

6.4.4 Congure Email Linkage

The system can send an email with alarm informaon to a user or users when an alarm is detected.

Steps

1. Go to System → Network → Advanced → Email .

2. Set the email parameters.

3. Click Apply.

Network Video Recorder User Manual

Loading ...

Hikvision IDS-96128NXI-I16 128-ch 3U 4K DeepinMind Super NVR