Loading ...
Loading ...
Loading ...
The analysis task of the camera is enabled. Device is waing to analyze data.
Enabled
The analysis task of the camera is enabled and device is analyzing data of the camera.
5. Oponal: For Non-Real-Time Face Picture Comparison analysis mode, click View Record to view
the progress of each day.
7.3 Self-Learning
This chapter is only available for certain models of perimeter protecon events.
7.3.1 Training Task
Training task is used to improve perimeter protecon alarm accuracy. Aer it is enabled, the device
would automacally collect training materials from perimeter protecon events. When there are
enough materials, the device would run a round of training and update the algorithm at the preset
me.
Go to Smart Analysis → Self-Learning → Training Task to enable the funcon under Training Task.
Figure 7-3 Training Task
Task Status
The task status for material collecon. The progress would reach 100% when enough training
materials are collected.
Force Training
This funcon is mainly used for technical supports, and you are not recommended to use it. If
the collected materials are not enough, this funcon can force the device to run a round of
training for the current collected materials.
Auto Update
Aer a round of training is completed, the device would automacally update the algorithm
according to the preset me.
Note
●
Training Task is enabled by default.
●
Enabling Training Task would occupy one engine, so the number of available channels for smart
analysis may decrease.
●
When the algorithm is upgrading, the number of false alarms may currently be increased.
Network Video Recorder User Manual
82
Loading ...
Loading ...
Loading ...