Loading ...
Loading ...
Loading ...
Configuration
Save Configuration 7
7-23
Configure Stop
You can select different stop conditions:
Column Settings Description
Trig Remote Stop via Interface command
time Stop at date and time
key Stop when key pressed (Key F2)
ti-int Stop after time window
at -Date- Stop on date and time (only active at Trig time)
after -time- Integrations time window in sec. (only active at Trig ti-int)
Menu Integration Setup, second field column Trig marker.
• Press Enter, select stop condition and confirm with Enter.
• Stop condition is now set. If you have selected a time to start (time) enter the
time in the column at. Proceed as described below:
Menu Integration Setup, first field column at is highlighted.
• Press Enter, select year, month, day, hour minute and seconds with the cursors
and press Enter to confirm.
• Stop time is now set. If you have an integration time window selected (ti-int)
proceed as follow:
Menu Integration Setup, second field column after is highlighted.
• Press Enter, select time with the cursors and confirm with Enter.
Stop time is now set.
• Save the configuration settings by pressing the SAVE function key.
Save Configuration
A configuration menu is displayed on the screen.
1. Press function key SAVE.
A list showing all existing configurations is displayed.
2. Select a configuration (for example, 10:USER) and press Enter to confirm.
The configuration is now being saved with the new name. The name of the new
configuration, 10:USER, is displayed in the menu item. W2 configurations are
marked as User2.
At the next startup of the device, the last saved and loaded configuration is applied by
default.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...