Loading ...
Loading ...
Loading ...
General Safety Instructions
Introduction 2
2-3
Introduction
The design and manufacture of this device conform to the latest state of technology and
the safety standards defined in IEC 61010-1/ 2nd edition. If used improperly, there is a
risk of damage to persons and property.
Protection Class
The device is assigned to protection class I according to IEC 61010-1 and is equipped
with a protective earth connector.
Qualified Personnel
The device may be operated only by qualified personnel.
This means only persons who are familiar with the installation, assembly, connection,
inspection of connections, and operation of the analyzer and who have completed training
in at least one of the following areas:
• Switching on/off, enabling, earth-grounding and identification of electrical
circuits and devices/systems according to the applicable safety standards.
• Maintenance and operation of appropriate safety gear, in accordance with the
applicable safety standards.
• First aid.
Safe Operation
• Ensure that all persons using the device have read and fully understood the
Operators Manual and safety instructions.
• The device may only be used under certain ambient conditions. Ensure that the
actual ambient conditions conform to the admissible conditions laid down in the
chapter "Technical Data".
• During operation, ensure that the cooling vents are not obstructed.
• Always comply with the instructions in Chapter 1, "Transport and Storage".
Proper Use
Do not use the device for any other purpose than the measuring of voltages and currents
that are within the measuring ranges and categories, including voltage to earth ground,
detailed in the "Technical Data" chapter.
Improper use shall void all warranty.
Warranty
• The warranty period for fault-free operation is limited to 2 years from the date of
purchase.
• The warranty period for accuracy is 2 years.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...