FLUKE N4K 3PP52IB User Manual for the Fluke N4K 3PP52IB Norma 4000 3-Phase Power Analyzer with 3 x PP52 Modules with Binding Posts & IEEE488/LAN

Loading ...

NORMA 4000/5000

Operators Manual

8-24

Set View Mode

You have the option to view individual measured values or a group of up to three values

(that is, all measured values of a channel) in graphic or table format. By default, the

measured values are shown in graphic format.

1. Press function key → table.

The data is now shown in a table in numerical format (shown here, current on

channel 1).

esn107.eps

Harmonic Order Mode

View Harmonics

1. Press function key mode to switch directly to mode DFT and call up a table showing

the integer harmonics.

Note

Switching between FFT and DFT is even possible in HOLD mode and

therefore allows different views on the data from the same single interval.

2. Alternatively, use function key Config to select mode DFT in the harmonics setup

screen. Afterwards, press Esc to return to the measurement screen.

Note

Modes FFT and DFT share the same frequency range setting.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE N4K 3PP52IB Norma 4000 3-Phase Power Analyzer with 3 x PP52 Modules with Binding Posts & IEEE488/LAN