User Manual FLUKE N4K 3PP52IB Norma 4000 3-Phase Power Analyzer with 3 x PP52 Modules with Binding Posts & IEEE488/LAN

Documents for FLUKE N4K 3PP52IB

User Manual for the Fluke N4K 3PP52IB Norma 4000 3-Phase Power Analyzer with 3 x PP52 Modules with Binding Posts & IEEE488/LAN

For N4K 3PP52IB.

• NORMA 4000/5000 Operators Manual1
  • Warranty2
  • Table of Contents7
  • List of Tables13
  • List of Figures15
• 1. About this Document17
  • Signs and Symbols19
  • Transport and Storage19
    • Transport19
    • Storage19
  • Recalibration19
  • Maintenance19
  • Decommissioning and Disposal20
    • Shutting Down20
    • Recycling and Disposal20
    • Housing20
    • Electronic Components20
• 2. General Safety Instructions21
  • Introduction23
  • Protection Class23
  • Qualified Personnel23
  • Safe Operation23
  • Proper Use23
  • Warranty23
  • Electrical Connections24
  • Binding Post24
  • Risks During Operation25
  • Maintenance and Repairs25
  • Accessories25
  • Shutting Down25
  • Safety Instructions on the Device Housing25
    • Mains Connection25
    • Input Voltage and Current25
    • Maintenance26
    • Indoor Use26
• 3. Design and Functions27
  • About this Chapter29
  • Terminals (Back)29
  • Operating Controls and Display30
    • Navigation and Measuring Keys31
    • Navigation through Display32
    • Overview of Function Keys32
  • Functions33
• Startup35
  • Taking Inventory37
  • Installation and Switching On37
    • Installation37
    • Switching Device On37
    • Switching Device Off38
• 4. Connection to Circuits39
  • Before You Begin41
  • Connecting Sequence41
  • Overview42
  • 1-Phase Measurement42
    • Direct Connection42
    • Measurement with Shunt44
    • Measurement with Voltage and Current Transducer45
  • Aron Circuit (2-Wattmeter Method, W2)46
    • Direct Connection46
    • Measurement with Shunt48
    • Measurement with Voltage and Current Transducer49
  • 3-Phase Measurement (W3)51
    • Direct Connection51
    • Measurement with Shunt52
    • Measurement with Voltage and Current Transducer53
    • Measurement with Star Point Adapter55
• 5. Simple Measurement57
  • About this Chapter59
  • Connection to Circuits59
  • Configuration59
  • Measuring60
• Configuration61
  • Set Up for Measuring63
  • Configuration63
  • Five Steps64
  • Call up General Setup and System Information Screen64
    • General Setup64
    • System Information Screen64
  • Load Configuration65
    • Load Configuration (Optional)65
    • Modify Loaded Configurations65
  • Configure Method65
  • Configure Data Transfer to Printer and PC65
    • Configure External Printer66
    • Configure Interface to PC67
    • Configure RS 23267
    • Configure GPIB Address68
    • Configure Ethernet68
  • Configure Average Time and Synchronization69
    • Timing & Sync Setup69
    • Set Average Time70
    • Select Synchronization Source71
    • Set Trigger Level71
    • Select Slope Direction72
    • Select Low-Pass Filter72
    • Configure Signal Output72
  • Adjust Date and Time73
  • Configure Current and Voltage Channels73
    • Current Channel Setup74
    • Configure Input Range75
      • Automatic Range Adjustment (Auto)75
      • Manual Range Adjustment (Range)75
    • Configure Scale75
    • Configure Coupling76
    • Configure Filter77
    • Voltage Channel Setup77
  • Switch Current Input to External Input (BNC)78
    • Switch Current Input78
    • Configure Auto-Range Selection78
    • Configure Scale78
  • Integration Function Configuration79
    • Integration Setup79
    • Select Integration Value81
    • Configure Status81
    • Configure Start82
    • Configure Stop83
  • Save Configuration83
  • Delete Configuration84
  • Undersampling and Aliasing84
• Measuring Process85
  • Introduction87
  • Prior to Measuring87
    • Measuring with Default Configuration87
    • Measuring with User-Defined Configuration87
  • Measure Voltage, Current and Power88
    • Measured Values for Individual Channels88
      • View the Values of One Channel88
      • View Detailed Values of One Channel88
    • View Totals of all Measured Values91
      • View Totals91
      • View Efficiency92
    • Compare Measured Values93
    • View Fundamental Values95
    • View Fundamental Value Details95
    • User-Defined Screen View97
      • View User-Defined Screen97
      • Select Numeric Values98
      • Change User-Defined Display Size99
      • Save User Defined Screen99
      • Back to Common Numeric Screen99
  • Change View Mode99
    • Numerical Display100
    • Vector Graphs100
      • View Vector Graphs100
      • Adjust Scale100
    • Oscilloscope Curves101
      • View Oscilloscope Display101
      • Adjust Scale of Axes102
      • Adjust Zero102
    • Recorder View102
  • Harmonic Analysis103
    • FFT Mode105
      • Adjust Scale105
      • View Details of a Measured Value106
      • Set Frequency Range106
      • Set View Mode108
    • Harmonic Order Mode108
      • View Harmonics108
      • View Harmonics Spectrum Relative to Fundamental in %110
    • STD Harmonic Mode (EN 61000-4-7 Ed 2.1 compliant)112
      • View Harmonics112
  • Integration Function/Electrical Work115
  • Save and Print Measurements117
    • Save Measurements117
    • Print Measurements117
  • VNC Remote Operation117
    • Introduction117
    • VNC Device Support117
• 9. NORMA Process Interface (Optional)121
  • Process Interface123
  • Pin Assignment123
  • Measured Values124
    • Torque124
    • Rotational Speed124
    • Sense of Direction124
  • Configuring the Process Interface124
    • Call Up Motor/Generator Setup124
    • Select Motor125
    • Configure Torque Sensor126
    • Configure Speed Sensor126
    • Configure Motor or Generator126
    • Configure Other Motors127
    • Configure Analog Output127
  • Measuring with the Process Interface128
    • View Measured Electric Values128
    • View Mechanical Values129
    • View Raw Values130
    • View Torque – All Motors130
    • View Speed – All Motors131
  • Process Interface - Technical Data132
    • Eight Inputs (Analog/Digital)132
      • Input Configured as Analog Input132
      • Input Configured as Digital Input132
    • Four Digital Inputs for the Detection of the Sense of Rotation132
    • Four Outputs (Analog)132
• 10. Measured Values Computation133
  • Measured values per phase x (channel x – values are indexed x)135
  • Total values (sum or average)136
  • Frequency Analysis138
  • Optional Process Interface Formulas139
• 11. Technical Data141
  • Technical Data Fluke NORMA 4000/5000143
    • General Technical Data143
    • Reference Conditions143
    • Ambient Conditions143
    • Standards143
    • Interfaces144
    • Data Memory144
    • Configuration Memory144
    • Channel Specifications144
      • Voltage144
      • Current144
    • Frequency and Synchronization145
    • Intrinsic Uncertainty (Reference Conditions) Voltage and Current145
    • Intrinsic Uncertainty (Reference Conditions) Active Power145
  • Block Diagrams149
    • Overview149
    • Voltage Channels150
    • Current Channels150
• 12. Service and Accessories151
  • Instrument153
    • Analyzer153
    • Optional Equipment153
    • Standard Equipment153
  • Accessories161
    • Accessories161
    • Software161