Loading ...
Loading ...
Loading ...
1760
Users Manual
1-12
Details
These LEDs provide information about the power supply:
LED POWER:
• Continuously green: Instrument is supplied from mains
• OFF: Supply from battery package
LED UPS:
Indicates charging state of the UPS battery package:
• Green: Battery is charged with 80 % to 100 % of nominal capacity
• Yellow: Capacity is between 30 % and 80 %, mains independent operation is
possible for more than 3 minutes
• Red: Capacity is between 25 % and 30 % of nominal capacity. Mains
independent operation is possible for less than 3 minutes
• Flashing: During charging the LED is flashing red, yellow, or green
corresponding to charging state and turns to continuous green light when
charging is complete
LED RECORDING STATUS:
This indicator gives information about the recording status of the measurement campaign.
Condition LED RECORDING STATUS
Instrument is not yet initialized for a measurement
campaign
OFF
Measurement initialization is in progress, Instrument is
not yet ready for recording data
green, flashing rapidly
Measurement campaign has been initialized, but not yet
started
Green
Measurement campaign is active, data are recorded Green, flashing slowly
Measurement campaign is active, data are recorded, but
some memory portions are full, i. e. some virtual
instruments do not record any more
Yellow, flashing slowly
Measurement campaign finished, no further campaign is
programmed, data ready for upload to the PC, Instrument
does not record data any more
Yellow
In case of error Red
LEDs Time Sync:
led-timesync.wmf
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...