Loading ...
Loading ...
Loading ...
gSetthechaptercreatortoonandthenstartrecording.Stopping
therecordingwillautomaticallycreateachaptermenu.
gThisfunctiononlyworksfornormalrecording.
-Aftertherecordinghasbegun,the"Doyouwanttocreatethe
chaptermenuafterthisrecording?"messageappearsfor10
seconds.SelectYesorNo.
-SelectingYeswiltcreateanewchaptermenuwhileselectingNo
wiltnot.
-Anewchapteriscreatedaccordingtotheselectedrecording
mode.Achapterwillbeabout5minuteslonginXPandSP,and
about15minutestonginLPandEPmode.
gTodisplaythecreatedchaptersandfinalizethedisc,pressthe
DISCMENUbutton.Thechaptersmenuappears.
gTheAutomaticChapterCreationfunctiondoesnotworkduring
TimerRecordingorwhenyouturnthepoweroff.
| Quick Recording Setting
it takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
set the Quick Recording feature to On. This enables you to record
immediately without having to wait for the disc to load.
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
2. Select Setup using the A v buttons, then press the ENTER or _.
button.
3. Select System using the ,L v" buttons, then press the ENTER or _.
button.
System menu will be displayed.
4. Select Quick Recording using the A T buttons, then press the
ENTER or _. button.
Quick Recording menu will be displayed.
5. Setect On using the A T buttons, then press the ENTER or _ button.
g The Quick Recording is set to Off as default.
g If the Quick Start Recording is set to On, the fan may continue to
operate after the unit is shut off.
| Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using
a Samsung TVremote control, by connecting the DVD Recorder to
a SAMSUNG TVusing an HDMI Cable. (see page 18) (This is only
available with SAMSUNG TVs that support Anynet+.)
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the A T buttons, then press the ENTER or _- button.
3. Select System using the ,A T buttons, then press the ENTER or _.
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the A T buttons, then press the
ENTER or D,-button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the A '_" buttons, then press the ENTER or _. button.
English - 35
Loading ...
Loading ...
Loading ...