Loading ...
Loading ...
Loading ...
If your TVhas an HDMI/DVI input, connect the HDMI/DVI cable to the TV. Youwill enjoy the best quality image
and sound.
| Connecting to a TV with HDIVllJack
Using an HDMI-HDMI cable, connect the HDMI OUT jack on the rear of the DVD Recorder to the RDMI IN jack of
your TV. Turn on your TV, then the DVD Recorder. Press the input selector on your TV remote control until the
HDMI signal from the DVD Recorder appears on your TV screen.
To watch through the HDMI output, set the digital
audio output to PCM. (See page 38)
Depending on the HDMI device(TV/HDMI
Receiver) you use, audio may not be supported.
If your TV does not support Dolby digita!/DTS,
Audio output is not available when you set the
Digital output to Bitstream or select DTS On in
the Audio setup menu. In this case, set the digital
audio ouput to PCM or DTS Off.
If you use an HDMt cable to connect a Samsung
TV to the DVD recorder, you can operate the
recorder using the TV remote control. (This is
only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC).) (See pages 35~36)
g Please check the _/net ÷ logo (If your TV has an
_,,z_.,.,,et÷logo, then it supports Anynet+ function.)
English - 18
Loading ...
Loading ...
Loading ...