Loading ...
Loading ...
Loading ...
ERROR MESSAGES
113
Appendix
5
Below is an explanation of error messages. Refer to these when necessary (if you press or do the operation correctly
while the error message is displayed, the message disappears).
ERROR MESSAGES
Error messages Cause/solution
1
Attach the embroidery frame. This message is displayed when the machine is ready to embroider pattern,
and the “Start/Stop” button is pushed while the embroidery frame is not
attached.
2
Cannot change the configuration of the characters. This message is displayed when there are too many characters and the
curved character configuration is impossible.
3
Cannot embroider since the embroidery unit is not
attached. Turn off the machine, and then attach the
embroidery unit.
This message is displayed when the “Start/Stop” button is pushed and the
machine is in embroidery mode, but the embroidery unit is not attached.
4
Cannot recognize the data for the selected pattern.
The data may be corrupted.
This message is displayed when there is a possibility that the data for the
selected pattern is corrupted.
5
Change to a larger embroidery frame. This message is displayed when the machine is in embroidery mode and the
small frame is attached, and the selected pattern does not fit in the small
frame.
6
Check and rethread the upper thread. This message is displayed when the upper thread is broken or not threaded
correctly, and the “Start/Stop” button is pressed.
7
Failed to save file. This message appears when you try to save more than 100 settings screen
image files in the USB media. In this case, delete a file from the USB media
or use different USB media.
8
Includes a special pattern that cannot be saved to
external memory. Save the pattern in the machine's
memory.
This message is displayed when you try to save a copyright protected
pattern to USB media.
According to copyright laws, patterns that are illegal to reproduce or edit
cannot be saved to USB media. If this message displays, save the pattern in
the machine’s memory.
9
Lower the presser foot lever.
This message is displayed when (Presser foot lifter button) is pushed
while the presser foot lever is raised/the needle is lowered.
10
Make sure embroidery frame is moved as far back
as possible. LOCK DOWN THE FRAME-SECURING
LEVER.
This message is displayed when the embroidery frame is attached.
11
No more patterns can be added to this
combination.
This message is displayed when you cannot combine patterns.
12
Not enough available memory to save the data.
Delete some patterns or use a different media.
This message is displayed when the memory is full and the embroidery
pattern cannot be saved.
13
Not enough available memory to save the pattern.
Delete another pattern?
This message is displayed when the memory is full and the embroidery
pattern cannot be saved.
14
OK to cancel the current pattern selection?
This message is displayed when, after selecting a pattern, is pressed
and the pattern is about to be deleted.
15 OK to delete the selected picture? This message is displayed when the image is deleted.
16
OK to move the embroidery carriage to its previous
position?
This message is displayed when replacing the embroidering bobbin thread.
17
OK to recall and resume previous memory? This message appears if the machine is turned off while embroidering, then
turned on again. Press to return the machine to the condition (pattern
position and number of stitches) when it was turned off. Follow the
procedure described in “If the Thread Breaks or the Bobbin Runs out of
Thread During Embroidering” on page 66 to align the needle position and
embroider the remainder of the pattern.
18
OK to revert to previous color changes?
This message is displayed when is pressed when changing thread
colors.
Loading ...
Loading ...
Loading ...